|
 List Price: unavailable Sale Price: $29.95 Availability: unspecified 
|
Fence can be attached to Rali G03L, G30N and B30N for precise rabbetting.
|
List Price: unavailable Sale Price: $33.99 Availability: unspecified
|
, allowing closer throat-opening settings, finer shavings, and reduced chatter. High carbon (.95) tool steel and hardened to Rc62, they . Fits Stanley, Bailey, Record, Footprint, and most other planes. 3/32" thick, USA, honing required before use.
|
List Price: unavailable Sale Price: $32.99 Availability: unspecified
|
Upgrading your plane with a Hock Blade? Add one of Hocks Chip Breakers for the ultimate plane blade tune-up! A planes chip breaker (also called a back-iron or cap-iron) deflects shavings up and away from the cutting edge allowing the blade to shear the wood fibers before they lever up and tear out of the wood surface. This deflection also bends and breaks the shaving fibers so they cant lift and tear out ahead of the blade. The action of the chip breaker pressing against the blade at the thin cutting edge also strengthen the edge, reducing flex and chatter. Most standard chip breakers are only .065 to .070" thick -- too thin to add much strength. Hock Chip Breakers are .118" (3mm) thick for added mass, rigidity and support for the cutting edge.
|
List Price: unavailable Sale Price: $25.99 Availability: unspecified
|
Handmade and 17 thicker than standard blades, allowing closer throat-opening settings, finer shavings, and reduced chatter. High-carbon (.95) tool steel and hardened to Rc62, they hold a razor-sharp edge. Fits Stanley, Bailey, Record, Footprint, and most other planes. 3/32" thick, USA, honing required before use.
|
 List Price: unavailable Sale Price: $109.50 Availability: unspecified
|
This Scrub Plane by EC Emmerich is used diagonally to the grain to remove large quantities of wood. Use to prepare a rough surface, a twisted board, or to significantly reduce the thickness of a board. Also used for distressing. No frills, just a hard working plane that will be a joy to use for generations.
|
List Price: unavailable Sale Price: $26.95 Availability: unspecified
|
Lutz brass violin planes are patterned after the traditional German tools used by generations of European luthiers. These polished cast brass tools feature arched soles (side-to-side and front-to-back) and a fine, high-carbon steel blade held firmly in place by heavy thumbscrew cap. Blade requires some shaping and honing for best results.
|
List Price: unavailable Sale Price: $19.99 Availability: unspecified
|
This nice looking spokeshave is made from rosewood with hand forged steel blade in a traditional way. The blade protudes the wooden body with two tangs and it can be adjusted by tapping on either tang. The blade can be honed on a fine grit sand paper on a flat surface and a strip of sand paper can be used to remove the burr. Not like other type of hand plane, shavings should be removed frequenty from the mouth during use.
|
List Price: unavailable Sale Price: $19.95 Availability: unspecified
|
5-pack of disposable replacement blades for RALI G03L, G30N adn B30N planes.
|
List Price: unavailable Sale Price: Too low to display. Availability: unspecified
|
Stanley 12331 replacement blade is designed to be used with the Stanley Block Planer number 12-220.
No features available.
|
List Price: unavailable Sale Price: $44.99 Availability: unspecified
|
Working together with renowned blade manufacturer, IBC, Woodcraft is proud to introduce the new line of Pinnacle plane blades. The evidence of IBCs plane blade manufacturing expertise is extensive, but its name is still vastly unknown to woodworkers. Woodcraft is proud to finally, and formally, introduce IBC to the woodworking world. Instead of being the best-kept secret in woodworking industry, the goal of the IBC brand is to become synonymous with "the best plane irons in woodworking." Match these blades against any other manufacturer?you will not regret it. You wont need to examine the factory edge under a microscope to see these blades are superior, youll feel it the first time you use one! A-2 tool steel. Double tempered to 60-62 Rc. Fully stress relieved. Air hardened. Cryogenically treated. Honed razor sharp - "will shave hair out of the box." Fully demagnetized. Precision ground top/bottom. Precision ground/hand polished sides. Rust protection: micro-thin film, water-soluble rust inhibitor, rust inhibitor paper wrap. All IBC products are 100 manufactured in Canada. Previously available only as original manufacturers equipment, these blades are designed for and are 100 compatible with Veritas planes.
